SOURCECODEBD.NET

Live Experience

8. EIGRP REDISTRIBUTION WITH RIPv2

HOW TO EIGRP REDISTRIBUTION WITH RIPv2
 
Interface IP Address Configuration  
  
R1  
  
Interface  IP Address   Subnet Mask  
S 0            1.1.1.1          255.0.0.0  
E 0            10.1.1.1        255.0.0.0  
  
R2  
  
Interface       IP Address   Subnet Mask
  
S 0                 1.1.1.2          255.0.0.0  
S1                  2.2.2.1          255.0.0.0  
E 0                 20.1.1.1        255.0.0.0  
Loopback 0  40.1.1.1        255.0.0.0  
  
R3  
  
Interface  IP Address   Subnet Mask  
S 0            2.2.2.2          255.0.0.0  
E 0           30.1.1.1         255.0.0.0  
  
 
Task 1  
  
Configure EIGRP AS 100 on R1 ( S0, E0 ), R2 ( S0, E0 ) and RIPv2 on R2 ( S1,  
Loopback 0 ) and R3 ( S0, E0 ) as per the above scenario. Mutually redistribute both  
protocols.
 
R1                              
  
Router eigrp 100                
Network 1.0.0.0                 
Network 10.0.0.0                
No auto-summary                 
                               
R3
 
Router rip
Version 2
Network 2.0.0.0
Network 30.0.0.0
No auto-summary
  
R2  
  
Router eigrp 100  
Network 1.0.0.0  
Network 20.0.0.0  
No auto-summary   
Redistribute rip metric 10 10 10 10 10  
  
Router rip  
Version 2  
Network 2.0.0.0  
Network 40.0.0.0  
No auto-summary   
Redistribute eigrp 100 metric 10  
  
Verification :  
 
R1#show ip route  
R2#show ip route  
R3#show ip route  
  
The output displays that RIP routes are advertised in R1 EIGRP AS 100 as ‘D EX’  
routes. EIGRP routes are advertised in RIP as ‘R’ routes.
You are here: Home / EIGRP / HOW TO EIGRP REDISTRIBUTION WITH RIPv2