SOURCECODEBD.NET

Live Experience

Static Routes Configuration in Juniper
 
You want to be able to connect your router to the Internet.
Create a default static route:
 
# set routing-options static route 0.0.0.0/0 next-hop 172.16.100.1
 
Check the routing table to see the route:
 
# run show route table inet.0
inet.0: 20 destinations, 20 routes (19 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0          *[Static/5] 00:06:50
                      > to 172.16.100.1 via se-0/0/3
 
Here's what the static route configuration might look like on the edge router:
 
# set routing-options static route 172.168.17.6 next-hop 172.16.100.1
 
Here, 172.168.17.6 is the address of the system outside your network, and 172.16.100.1 is the address of the other router to which the interface on your router connects.
 
 
You are here: Home / Knowledge Base / Static Routes Configuration in Juniper