SOURCECODEBD.NET

Live Experience

Cisco NAT Configuration Configuration


Router1>enable
Router1#configure terminal

Router1(config)#ip nat pool SourcePOOL 100.100.100.1 100.100.100.14 netmask 255.255.255.240
[Create a POOL Name SourcePOOL]

Router1(config)#access-list 1 permit 192.168.1.0 0.0.0.255
[Create a Access List Number 1]

Router1(config)#ip nat inside source list 1 pool SourcePOOL overload
[Create NAT Which source list 1 is Access list Number and Pool name SourcePOOL]

Router1(config)#interface fa1/0
Router1(config-if)#ip nat inside

Router1(config-if)#exit

Router1(config)#interface s0/0
Router1(config-if)#ip nat outside

Router1(config-if)#end
Router1#copy running-config startup-config

Now Try Ping From PC
C:\>ping 100.100.100.1

You are here: Home / Knowledge Base / Cisco NAT Configuration Configuration