SOURCECODEBD.NET

Live Experience

Cisco Router Basic Configuration

There are three mode in a router
 1. Exe mode
 2. Privilege mode
 3. Configuration mode
Exe Mode: Exe mode can be determined by seeing that the router in the following symbol:
  “router > " [indicating that router in exe mode],

Read more...

Cisco PPPoE Configuration

ip name-server 15.15.15.1
!
ip dhcp pool 10
   network 172.16.100.0 255.255.255.0
!
username cisco password 0 sisco

Read more...

How to Configure Static Routing

R1

Router>
Router>en
Router#config t
Router(config)#hostname R1
R1(config)#int e1/0

Read more...

How to enable Remote Connection with Telnet and Encrypt the Telnet Session.

This commands are used to set password during login into the Console

DHK#configure terminal
DHK(config)#line console 0
DHK(config-line)#password 123

Read more...

Cisco IOS Installation and Setup IP address on ROMON Mode

Before Starting procedure you need to download and install a TFTP server on your PC
There are many Free TFTP server just download one and install your PC.

Create a consol connection with the default setting

Read more...

Cisco DHCP Server COnfiguration

Router#conf t
Router(config)#ip dhcp pool POOL_NAME
Router(dhcp-config)#network 192.168.10.0 255.255.255.0
[This will create a DHCP pool]

Read more...

Cisco Bandwidth Manage with Policy Map
For diffrent IP and Diffrent Users

access-list 101 permit ip any host 172.16.200.3
access-list 102 permit ip any host 172.16.200.4
access-list 103 permit ip any host 172.16.200.5
access-list 103 permit ip any host 172.16.200.6


class-map match-any mail

Read more...

Cisco NAT Configuration Configuration


Router1>enable
Router1#configure terminal

Router1(config)#ip nat pool SourcePOOL 100.100.100.1 100.100.100.14 netmask 255.255.255.240
[Create a POOL Name SourcePOOL]

Read more...

Cisco Basic Administrative Configuration of a Router

 
Router> (This prompt indicates User mode or Non privileged mode)
Router > ? (This shows possible commands to be given from user mode)
Router > enable (This command will switch to Enable/Privileged/EXE mode)

Read more...

Related Articles

You are here: Home / Knowledge Base