SOURCECODEBD.NET

Live Experience

Juniper Switch IP Configuration In VLAN 

First Need to create a Vlan. From which vlan you want to access remotely. Vlan Name is Management and Vlan ID is 5. 
#set vlan Management vlan-id 5

#set vlans Management l3-interface vlan.5  [Make this Vlan as work with layer 3]

Then setup IP address at unit 5.
#set interfaces vlan unit 5 family inet address 172.16.100.5/24

Now if you connect with VLAN 5 network then you can assecc remotely via Telnet to 172.16.100.5

 

You are here: Home / Switching / Juniper Switch IP Configuration In VLAN