SOURCECODEBD.NET

Live Experience

 

GLBP Configuration with Load Sharing
 
Router1
 
!
interface GigabitEthernet0/0
  ip address 192.168.1.2 255.255.255.0       <- Make sure this IP is in the same network as your Virtual Gateway IP.
  glbp 1 ip 192.168.1.1                      <- You Virtual Gateway  
  glbp 1 weighting 100 lower 91 upper 99     <- Threshold of 91-99 If it fails the weight will drop below 91 and state will be standby
  glbp 1 load-balancing weighted             <- Will Load Balance according to weight.
  glbp 1 weighting 160                       <- Higher the weight the Higher Priority 
  glbp 1 weighting track 1                   <- The weight is based on the Track 1 interface watching Serial 0/0/0.101
  no ip redirect                             <- Does not redirect traffic if the router has to Resend to sender.
!
 
 
Router2
 
!
interface GigabitEthernet0/0
  ip address 192.168.1.3 255.255.255.0       <- Make sure this IP is in the same network as your Virtual Gateway IP.
  glbp 1 ip 192.168.1.1                      <- You Virtual Gateway  
  glbp 1 weighting 100 lower 91 upper 99     <- Range of 91-99 If it fails the weight will drop below 91 and state will be standby
  glbp 1 load-balancing weighted             <- Will Load Balance according to weight.
  glbp 1 weighting 80                        <- Weight is lower on this router, traffic will be directed through the other router
  glbp 1 weighting track 1                   <- The weight is based on the Track 1 interface watching Serial 0/0/0.101
  no ip redirect                             <- Does not redirect traffic if the router has to Resend to sender.
  
!
 
Verification:
 
Router1#show glbp
Router2#show glbp
You are here: Home / Switching / HOW TO GLBP LoadSharing