SOURCECODEBD.NET

Live Experience

Vlan Configuration 2948g

2948G-L3#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
2
948G-L3(config)#bridge irb

!--- The bridge irb command enables Integrated Routing & Bridging on the router,
!---  which allows you to configure a BVI interface.

2948G-L3(config)#bridge 1 protocol ieee

!--- The bridge 1 protocol ieee command enables bridging with the IEEE
!--- 802.1d spanning-tree protocol.

2948G-L3(config)#bridge 1 route ip

!--- The bridge number route ip command configures an IP address on the BVI
!--- so you can Telnet into the router.
 
2948G-L3(config)#interface bvi 1
2948G-L3(config-if)#ip address 194.193.192.155 255.255.255.0
2948G-L3(config-if)#exit

VLAN Configuration:

2948G-L3(config)#interface fast 1
2948G-L3(config-if)#no shutdown
2948G-L3(config-if)#bridge-group 1

948G-L3(config)#interface fast 2
2948G-L3(config-if)#no shutdown
2948G-L3(config-if)#bridge-group 1


.............................................

2948G-L3(config)#interface bvi 2
2948G-L3(config-if)#ip address 202.79.17.172 255.255.255.240
2948G-L3(config-if)#exi


2948G-L3(config)#interface fast 3
2948G-L3(config-if)#no shutdown
2948G-L3(config-if)#bridge-group 2

948G-L3(config)#interface fast 4
2948G-L3(config-if)#no shutdown
2948G-L3(config-if)#bridge-group 2

 

You are here: Home / Switching / Vlan Configuration 2948g